Ride-on Mower

  • Single-cylinder 13 kW (18 hp) engine
  • 107 cm (42 in.) Edge™ Cutting System
  • CVT/Automatic Transmission
  • Mows up to 8000 m²
PRICE $3,741.00

* Prices exclude accessories and options, include GST and are only available in Australia. Delivery not included and cost may vary by outlet. Photo may show options not included in the price. Products may not be available in all regions. Product features subject to change.

JOHN DEERE

Features

Powerful engine features full-pressure lubrication for long life

A 13-kW (17.5-hp), single-cylinder engine has plenty of power and torque to handle tough mowing, mulching, and bagging conditions:

  • Electronic ignition for fast starts
  • Full-pressure lubrication and oil filter for cleaner oil, prolonging engine life, and extending the time between oil changes
    • More effective when operating the tractor on an incline

Fuel tank:

  • The capacity is 9.1 L (2.4 U.S. gal.)
  • The fuel-filler opening is conveniently located under the seat.
    • Filling the tank without spilling is easy.

Frame made of full-length welded steel for reliability

The solid one-piece frame is constructed of 12-gauge, 2.66-mm (0.105-in.) steel:

  • Full-length, robotically-welded frame design has high-strength steel rails for added strength and long life.
Cast-iron front axle will not bend

Automotive-like steering system with sector and pinion steering gears and single drag link with a tie rod provides a very strong, low-effort, and tight-turning system.

CargO Mount™ system makes installation of rear bagger and other attachments easy

The CargO Mount system is a combination of front- and rear-mounting points providing convenient and easy installation of the sun canopy, rear bagger, and other attachments.

Automatic transmission makes it easy to choose the exact travel speed for each operating condition

The automatic transmission allows the operator to easily choose the desired forward or reverse travel speed by simply depressing a single foot pedal; this is similar to the way the driver of an automobile with automatic transmission changes speed when depressing the accelerator.

Whether a slow speed for trimming or faster speed for open-area mowing is desired, the operator can easily adjust by how far the foot pedal is depressed.

  • Forward: 0 to 8.9 km/h (0 to 5.5 mph)
  • Reverse: 0 to 5.1 km/h (0 to 3.2 mph)

Operator station designed for comfortable operation

Steering wheel is positioned and angled to give the operator plenty of room and steering comfort.

Seat can be tilted forward for protection from the elements and to provide easy access to the fuel tank.

Instruments and controls are easy to find and convenient to use

  • The hourmeter makes it easy to tell when oil changes and other maintenance should be performed.
  • The service reminder feature will indicate that a general lubrication or mower/engine service interval has been reached.
Mower deck height adjustment

A spring-assisted, low-effort lift lever simplifies setting and adjusting the mower cut height:

  • Increments of 0.64-cm (0.25-in.) allow for fine-tuning the cut height
  • Cut height is adjustable from 2.5 cm (1 in.) to 10.2 cm (4 in.).
Parking brake control
The parking brake control is conveniently located on the tractor pedestal for easy access. It holds the brake pedal securely in the locked position.
Manual power take-off (PTO)

PTO engagement lever

The mower deck is engaged with the easy-to-see and easy-to-use yellow lever above the dashboard. Its placement on the right side leaves a lot of room on the left, the entry side of the tractor, for the operator to get on and off the tractor.

Serviceability is convenient with an easy-open hood

  • Important service points are located within easy reach.
  • A service interval decal is provided inside the tractor hood for convenience when servicing the tractor.
  • Hourmeter includes a service reminder feature that flashes for two hours when a lubrication or mower/engine service interval has been reached.
Hood will not dent or rust and includes quality headlights for good visibility
  • Two headlights provide good lighting for nighttime operation.

The Edge™ cutting system gives superior performance

The 107-cm (42-in.) two-spindle, three-in-one mower is constructed of 13-gauge, 2.3-mm (0.090-in.) steel for long life.

A mulch cover is an optional attachment that can be installed without tools to allow mulching with the standard mower blades.

Mower wash port

A wash port is provided to make cleaning the underside of the mower deck easy.

Mower deck height adjustment

A spring-assisted, low-effort, ergonomically-designed lift lever simplifies setting and adjusting the mower cut height:

  • Increments of 0.64 cm (0.25 in.) allow the operator to fine-tune the cut height from 2.5 cm (1 in.) to 10.2 cm (4 in.).

Two-year or 120-hour bumper-to-bumper warranty is standard

An exclusive 2-year or 120-hour (whichever comes first), single-source, bumper-to-bumper warranty* is standard for all John Deere 100 Series Tractors.

The warranty is hassle free, with one company handling all of the paperwork.