Features

Engine is smooth and powerful V-twin design

A V-twin engine with 44.2-cu in. (724-cc) displacement provides plenty of power and torque to handle tough mulching, mowing, and bagging conditions.

The Z525E offers excellent power and fuel economy, electronic ignition for fast starts, cast-iron sleeves for longer engine life and a spin-on oil filter with pressure lubrication.

There’s easy access to the no-tools oil drain valve for oil changes, and a rear engine guard for protecting the engine and providing additional strength and integrity.

The Z525E engine has extended life series (ELS) features for enhanced performance and longer life.

Full-featured engine is more reliable and lasts longer

The Z525E has a full-featured engine with extended life series (ELS) features that is engineered to deliver world-class endurance and power. A step above the competition, it is designed to be more dependable and longer lasting, saving time and money over the long run.

It’s built to exceed demanding needs by incorporating premium features and innovative designs, including (but certainly not limited to.):

Overhead valve (OHV) design for cooler operation and longer valve life
Full-pressure lubrication system for maximum protection
Wear-resistant chrome-plated valve stems for long-life valves
Maintenance-free electronic ignition for quick, dependable starts.

The 48-in. (122-cm) Accel Deep™ (48A) Mower Deck cuts clean and is versatile

The 48-in. (122-cm) Accel Deep Mower Deck is a stamped-steel, deep, flat-top design that delivers excellent cut quality, productivity, cleanliness, durability, and versatility.

The 48A Mower Deck has strong spindle pockets, to keep the blades aligned, even after years of tough service. Mower wheels are double-captured, to provide greater strength and durability for longer, trouble-free life. The low-tension belt-drive design reduces the side load on the engines lower bearing and mower deck bearings for longer life.

The 48A Mower is designed for maximum versatility, providing the greatest ease in changing from one mower discharge mode to another.

The 54-in. (138-cm) Accel Deep™ (54A) Mower Deck cuts clean and is versatile

The 54-in. (138-cm) Accel Deep Mower Deck is a stamped-steel, deep, flat-top design that delivers excellent cut quality, productivity, cleanliness, durability, and versatility.

Deep mower-deck stamping gives excellent cut quality. It allows the cut and suspended material room to exit the deck without getting recut – allowing more power to be used to cut incoming grass, which greatly improves mower capacity.

The flat-top shape of the deck stamping is optimal for keeping itself and the operator clean – there are few places to catch and hold material on top and underneath the deck. The top of deck stays cleaner, reducing time and effort needed for cleaning and service, and there’s less need to clean and remove build-up of material from underside deck. Cleaning a mower deck, both top and bottom, is one of the most frequent maintenance activities!

Operator station is designed for comfort and convenience

There’s excellent visibility forward and to the trim side of the deck making operation easy and comfortable for the operator, controls are colour coded for easy identification, and the low-fuel warning light is easily visible in daylight.

Twin-lever controls adjust for convenience and operator comfort, and a large foot platform with secure volcano grips and raised footrests offers superior operator comfort.

The Z375R also offers a comfortable seat with armrests that can be flipped up and out of the way, with steel coil suspension springs under the seat to absorb shocks and smooth your ride.

Serviceability is designed-in for convenience

Accel Deep™ Mower Decks have several features that make them easy to service. The flat-top design minimises places for debris to collect – and spring-loaded, flip-up belt guards make removing debris easy.

Provision is provided for a standard, 3/8-in. (9.5-mm) ratchet wrench to be used for releasing belt tension when removing the drive belt.

Tie-down locations are also provided for convenience and safety when trailering the machine.

Instruments and controls are convenient and easy to use

Motion-control levers

The motion-control levers can be adjusted to two height settings and nine fore-aft settings for a total of 18 different positions. This provides increased operator comfort and more precise control of the machine.

A standard shock absorber for the motion-control levers makes maneuvering ZTrak™ Mowers easy and comfortable.

On-board tracking adjustment from the operator seat is quick and easy – the cut-height pin includes a 13-mm wrench and doubles as a convenient tool for adjusting tracking and the motion-control lever position.

Mower deck lift/cut-height adjustment

The Mower deck cutting height adjusts from 1 in. (2.5 cm) to 4 in. (10.2 cm) in 0.25-in. (0.64-cm) increments for excellent cut quality and performance, and has built-in memory so the operator can easily return to the desired cutting height after raising the deck.

Design includes a heavy-duty formed and welded steel frame

ZTrak Mowers are designed around a heavy-duty formed and welded steel frame for strength and reliability.

Large front caster wheels and large rear drive wheels provide several operator benefits: a smoother ride, better slope performance, more operator comfort over uneven ground and better traction

The operator platform is roomy and uncluttered for maximum comfort, and the controls are convenient to use. It’s easy to get on and off the mower, there’s ample legroom for comfortable operation, and colour-coded and logically placed controls.

Reliable electric PTO clutch, durable dual transmissions & axles

A heavy-duty electric power take-off (PTO) clutch is controlled by a convenient, dash-mounted control.

Dual transmissions efficiently power the ZTrak™ mower forward and reverse and give steering capability. Transmissions are set low in the vehicle for excellent hillside stability, and are reliable and durable.

They feature beefed-up 1-in. (2.5-cm) axles for greater strength, and maintenance-free unitized transmissions are sealed and have no hose connections to leak hydraulic fluid. Tow-valve controls are provided for each transmission and located above the vehicle frame on either side of the engine.