Ride-on Mower
- 18 kW (24 hp) 3-cyl Diesel Engine
- Configuration: 122 cm (48 in.) Accel Deep™ Deck / 137 cm (54 in.) High-Capacity Deck / 152 cm (60 in.) High-Capacity Deck
- Four-wheel steering for unsurpassed trimming ability
- Two-wheel drive with standard differential lock
Choose Your Configuration
Features
Engine is 3-cylinder diesel for fuel economy and durability
A liquid-cooled, 3-cylinder diesel engine provides exceptional power, performance, fuel economy, and durability to handle commercial-use applications.
A large 19.7-L capacity fuel tank holds enough fuel for extended operation between refills.
54-in. (137-cm) and 60-in. (152-cm) Edge™ High-Capacity (HC) Mower Decks are heavy duty
Four-year or 700-hour bumper-to-bumper warranty is standard
An exclusive 4-year or 700-hour (whichever comes first), single-source, bumper-to-bumper warranty* is standard for all John Deere X700 Series Tractors.
Four-wheel power steering for superior maneuverability and trimming
- Reduced operator fatigue
- Better maneuverability
- Increased productivity.
Operator station is comfortable and convenient
Two-piece, 21-in. (53-cm) high-back seat, with John Deere branded embroidery, has a thick seat cushion for lasting comfort, even after a full day of use. The back can be angled to maximise operator comfort by using a convenient lever on the side of the seat.
12-V outlet located for the convenience of connecting a variety of electrical and electronic equipment.
Instruments and controls are easy to find and use
- Hour meter makes it easy to tell when oil changes and other maintenance should be performed.
- A tachometer graphically displays engine speed.
Twin Touch foot control
Power steering is standard equipment.
The hydraulic system allows effortless equipment control.
Modern styling has a functional design
Full-length welded steel frame.
The 4WD tractors use heavy-duty cast and machined front spindle and wheel motor assemblies for durability and long life.
Hydrostatic drive with Twin Touch™ control is easy to operate
- Automotive-type accelerator control for easy operation
- Twin Touch design that allows operator to change direction without lifting foot off platform.
Cruise control is standard equipment.
A transmission oil cooler is standard equipment.
Thoughtful designs promote safe operation and convenient service
The hydrostatic transmission foot pedals must be in neutral, with brake depressed, PTO disengaged, and the ignition key used, before the tractor will start.
The one-piece hood opens easily to permit checking and servicing the engine.
48-in. (122-cm) Accel Deep™ Mower Deck cuts clean and is versatile
- Clean flow of material out of discharge area prevents cut material from interfering with cutting the incoming grass, making it possible for the blades to cut incoming material cleanly.
The 48A Mower Deck features a 5/8-in. (16-mm) diameter solid-steel rod side bumper that provides extra strength and protection.
Specifications: | |
---|---|
Model | X754 (Model year 2023) |
Key Specs | |
Engine power | 24 hp 17.9 kW |
Engine manufacturer/model | 3TNM74F |
Transaxle type | K90 hydrostatic integrated with transaxle |
Transaxle control | Twin Touch™ pedals |
Rear tires | 26x10.5-12 turf |
Lift system type | Two-function hydraulic |
Cutting width | Accel Deep™ mower deck, 48 in. 122 cm High capacity mower deck, 54,60 in. 137, 152 cm |
Engine | |
Power | 24 hp 17.9 kW |
Displacement | 60.6 cu in. 993 cc |
Manufacturer/model | 3TNM74F |
Type | Diesel, overhead valve, full-pressure lube, oil filter |
Cylinders | Three, cast-iron liners |
Governor | Mechanical |
Choke/speed control | One lever |
Cooling method | Liquid |
Air cleaner | Paper dry-type with primary and secondary elements |
Oil change | No tools |
Fuel system | |
Type | Diesel |
Fuel delivery | In-line indirect injection |
Fuel gauge | Gauge on dash |
Fuel tank location | Rear |
Fuel fill opening | On left fender, 3 in. 7.6 cm |
Fuel tank capacity | 5.2 U.S. gal. 19.7 L |
Electrical system | |
Battery | 12 V 500 CCA |
Charging system | Engine-mounted alternator, regulated, 40 amp |
Engine starter | Solenoid shift |
Hour meter | Yes |
Headlights | Two standard, halogen, 37 W |
Taillights or reflector | Taillights |
Backup lights | Yes |
Rear work lights | Yes |
12-V outlet | Yes |
Transaxle | |
Type | K90 hydrostatic integrated with transaxle |
Control | Twin Touch™ pedals |
Cruise control | Yes |
Oil cooler | Yes |
Oil filter | Replaceable suction side 10 micron |
Differential lock | Standard |
Forward speed | 0-8.5 mph 0-13.7 km/h |
Reverse speed | 0-6 mph 0-9.7 km/h |
Brakes | Internal wet disc |
Chassis | |
Frame | Welded heavy-duty |
Primer/paint | E-coat/powder |
Weight bracket | Standard front - holds up to four Quik-Tatch weights, 42 lb 19 kg |
Receiver hitch | Yes, front |
Front axle | JDM BA8 nodular iron casting |
Spindle bushings | Metal, replaceable |
Front tires | 18x7-8 turf |
Rear tires | 26x10.5-12 turf |
Hood material | Noryl GTX902, painted |
Fender deck material | RIM with in-mold paint |
Floor mats | Sure-grip rubber |
Storage | Covered toolbox |
Service interval decal | Yes |
Fender handles/grips | Handles |
Cup holder | Yes |
Equipment mounting | Optional category 1 3-point hitch |
Maximum towing capacity | 1,000 lb 454 kg |
Steering | |
Type | Hydraulic power |
Four-wheel steer | Yes |
Steering wheel | 14 in. 35.6 cm |
Tilt steering wheel | Standard, six position |
Turning radius | 21 in. 53.3 cm |
Uncut circle radius | 54 HC, 10 in. 25.4 cm 60 HC, 6 in. 15.2 cm |
Seat | |
Type | Two-piece adjustable seat with brand embroidery |
Seat back height | 21 in. 53.3 cm |
Armrests | Optional |
Fore-aft adjustment | While seated, slide rail, 14-position, 7 in. 17.8 cm |
Seat suspension | Six-position parallel arm |
Lift system | |
Type | Two-function hydraulic |
Hydraulic outlets | Four, standard |
Mower cut height | 1-5.25 in. 2.5-13.3 cm |
Cut height increments | 0.25 in. 0.64 cm |
Preset cut height | Yes |
Mower deck | |
Type | Side discharge |
Cutting width | Accel Deep™ mower deck, 48 in. 122 cm High capacity mower deck 54, 60 in. 137, 152 cm |
Construction | Stamped steel deck shell |
Mower deck material | 48A, 10 gauge 0.135 in. 3.4 mm 54 HC and 60 HC, 9 gauge 0.150 in. 3.8 mm |
Mower wash port | Yes |
Mower drive system | Hydraulic clutch, shaft |
Mower wheels | Four |
Mower wheel adjustment | Spring-loaded pin |
Mower level adjustment | Exact Adjust ports and onboard deck-leveling gauge |
Mower attachability | |
Type | Roll under tractor (48A) Drive-over deck (54, 60 HC) |
Front draft arms | Overcenter |
Rear draft arms | V-align |
Mower wheels rotate | Yes, 90 degrees for easy mower removal (48X), N/A (54 HC, 60 HC) |
Drive system | Shaft or AutoConnect |
Safety | |
Meets ANSI standard | Yes |
Meets OPEI standard | Yes |
Backup protection | Reverse Implement Option (RIO) |
Safety video | Yes |
Buyer's notes | |
Notes | Styled alloy wheels are standard equipment One-piece hood for easy engine access Hydraulic modulated PTO clutch for smooth mower and implement engagement |
Optional equipment | |
Rear bagger | 7, 14, 19 bu 250, 500, 670 L |
Mulching system | Yes, MulchControl™ |
Front blade | 54 in. 137.2 cm |
Snow blower | Two-stage, 47, 54 in. 119.4, 137.2 cm |
Sprayer | Tow-behind, 15, 25, 45 U.S. gal. 56.8, 94.6, 170.3 L Mounted, 25 U.S. gal. 94.6 L |
Spreader | Tow-behind, 125, 175 lb 57.7, 79.4 kg Mounted, 125 lb 57.7 kg |
Front bumper | Standard bumper/weight bracket |
Weather protection | Hard-side cab, weather enclosure |
Bucket holder | Yes, double bucket |
Grass striping | Grass groomer kit, 48-in. (122 cm) mower only |
Tow-behind tools | 21 |
Mowers | 48A, 54 HC, 60 HC |
Front thatcher | 38, 46, 54 in. 96.5, 116.8, 137.2 cm |
Brush guard | Yes |
Tractor shovel | 54 in. 137.2 cm |
Powered material collection | Power Flow, 7, 14, 19 250, 500, 670 L |
Rotary tiller | 42, 48 in. 106.7, 121.9 cm |
Plow, moldboard | Adjustable, 8-14 in. 20.3-35.6 cm |
Box scraper | 48 in. 121.9 cm |
Cultivator | Adjustable, 30-46 in. 76.2-116.8 cm |
Rear blade | 60 in. 152.4 cm |
Rotary broom | 52, 60 in. 132.1, 152.4 cm |
3-point hitch | Category 1 |
Rear power take-off (PTO) | 540 rpm |
Disk harrow | Adjustable, 42-52 in. 106.7-132.1 cm |
Landscape rake | 60 in. 152.4 cm |
Rear receiver hitch | 1.25 x 1.25 in. 3.18 x 3.18 cm |
Front loader | Not available |
Dimensions | |
Height | 54.5 in. 1384 mm |
Overall length | 75 in. 1905 mm |
Wheelbase | 54.5 in. 1384 mm |
Width with mower | 48A: 62.5 in. 1588 mm 54 HC: 64.5 in. 1638 mm 60 HC: 74 in. 1880 mm |
Width with mower (deflector raised for storage) | 48A: 53.6 in. 1362 mm 54 HC: 57.5 in. 1461 mm 60 HC: 62 in. 1575 mm |
Width without mower | 47 in. 1195 mm |
Weight | No fuel or mower, 997 lb 452 kg |
Additional information | |
Manufacturing location | Horicon, Wisconsin, USA |